The best solutions for your company
Products
You are here: Products -> AUTOMATION -> AEB ROBOTICS -> SPARE PARTS

SPARE PARTS

SPARE PARTS


AIR PNEUMATIC BRAKE

 
AIR PNEUMATIC BRAKE
 

AIR PNEUMATIC BRAKE

Cod. : 110009001

 Air pneumatic brake (normally closed) to be applied to vertical movements to avoid falls in case of emergency or absence of the motor torque.
Air control via 24V solenoid valve, connectable directly to the driver (ALPHA Series) that moves the vertical axis:

- the ON solenoid valve provides air into the pneumatic brake, which then releases the axis
- the OFF solenoid valve removes the air in the pneumatic brake, which then blocks the axis

 

CABLE CONNECTION - 3MT ALPHA

 
CABLE CONNECTION - 3MT ALPHA
 

CABLE CONNECTION - 3MT ALPHA

Cod. : 612252000

Technical specifications

Permissible temperature moving/fixed: Temperature: -5%uFFFDC a 70%uFFFDC
Bending radius Dynamic laying: 90mm
Bending Radius Fixed installation: 45mm
Max Acceleration : 20m/s2
Rated voltage 300V (DIN VDE 0245)
Flame retardant: Norme IEC 332-1, CEI 20-35, FT1.
Conductor: Fine-wire special conductor in especially bending resistant model made of bare copper wires.
Conductor twisting: Two conductors, each braided in a short pitch, conductor pairs are then twisted in short pitch around a polymer core.
Conductor colors: Color code DIN 47100
Conductor insulation: Mechanically tough PVC
Shield: Tinned copper braid, coverage approx. 90% optical.
Outer jacket:PVC-based, low-adhesion blend, adapted to the requirements of the Energy Chain%uFFFD, oil-resistant in accordance with VDE. Color: grey (RAL 7001)

 

CABLE CONNECTION 6MT ALPHA

 
CABLE CONNECTION 6MT ALPHA
 

CABLE CONNECTION 6MT ALPHA

Cod. : 612253000

Technical specifications

Permissible temperature moving/fixed: Temperature: -5%uFFFDC a 70%uFFFDC
Bending radius Dynamic laying: 90mm
Bending Radius Fixed installation: 45mm
Max Acceleration : 20m/s2
Rated voltage 300V (DIN VDE 0245)
Flame retardant: Norme IEC 332-1, CEI 20-35, FT1.
Conductor: Fine-wire special conductor in especially bending resistant model made of bare copper wires.
Conductor twisting: Two conductors, each braided in a short pitch, conductor pairs are then twisted in short pitch around a polymer core.
Conductor colors: Color code DIN 47100
Conductor insulation: Mechanically tough PVC
Shield: Tinned copper braid, coverage approx. 90% optical.
Outer jacket:PVC-based, low-adhesion blend, adapted to the requirements of the Energy Chain%uFFFD, oil-resistant in accordance with VDE. Color: grey (RAL 7001)

 

CABLE CONNECTION ALPHA CU4/ALPHA SD05

 
CABLE CONNECTION  ALPHA CU4/ALPHA SD05
 

CABLE CONNECTION ALPHA CU4/ALPHA SD05

Cod. : 612254000

Technical details:

Conductor insulation: Mechanically tough PVC

Heat Category: T2 (105%uFFFD)

Connectors: WEIDMULLER spring connection

 

CABLE CONNECTION ALPHA CU4/ALPHA IO16

 
CABLE CONNECTION ALPHA CU4/ALPHA IO16
 

CABLE CONNECTION ALPHA CU4/ALPHA IO16

Cod. : 612256000

Technical details:

Conductor insulation: Mechanically tough PVC

Heat Category: T2 (105%uFFFD)

Connectors: WEIDMULLER spring connection

 

CABLE WITH DRIVER/CALOTTA MOT 6600 MM 3000

 
CABLE WITH DRIVER/CALOTTA MOT 6600 MM 3000
 

CABLE WITH DRIVER/CALOTTA MOT 6600 MM 3000

Cod. : 612285000

Technicals Details:

Permissible temperature moving/fixed: Temperature: -5%uFFFDC a 70%uFFFDC
Bending radius Dynamic laying: 90mm
Bending Radius Fixed installation: 45mm
Max Acceleration : 20m/s2
Rated voltage 300V (DIN VDE 0245)
Flame retardant: Norme IEC 332-1, CEI 20-35, FT1.
Conductor: Fine-wire special conductor in especially bending resistant model made of bare copper wires.
Conductor twisting: Two conductors, each braided in a short pitch, conductor pairs are then twisted in short pitch around a polymer core.
Conductor colors: Color code DIN 47100
Conductor insulation: Mechanically tough PVC
Shield: Tinned copper braid, coverage approx. 90% optical.
Outer jacket:PVC-based, low-adhesion blend, adapted to the requirements of the Energy Chain%uFFFD, oil-resistant in accordance with VDE. Color: grey (RAL 7001)

 

ALPHASD05 CONNECTION CABLES FOR MOTORS

 
ALPHASD05 CONNECTION CABLES  FOR MOTORS
 

ALPHASD05 CONNECTION CABLES FOR MOTORS

Cod. : 612286000 Technical Details:

Permissible temperature moving/fixed: Temperature: -5%uFFFDC a 70%uFFFDC
Bending radius Dynamic laying: 90mm
Bending Radius Fixed installation: 45mm
Max Acceleration : 20m/s2
Rated voltage 300V (DIN VDE 0245)
Flame retardant: Norme IEC 332-1, CEI 20-35, FT1.
Conductor: Fine-wire special conductor in especially bending resistant model made of bare copper wires.
Conductor twisting: Two conductors, each braided in a short pitch, conductor pairs are then twisted in short pitch around a polymer core.
Conductor colors: Color code DIN 47100
Conductor insulation: Mechanically tough PVC
Shield: Tinned copper braid, coverage approx. 90% optical.
Outer jacket:PVC-based, low-adhesion blend, adapted to the requirements of the Energy Chain%uFFFD, oil-resistant in accordance with
VDE. Color: grey (RAL 7001)

 

MOTOENCODER 1Nm

 
MOTOENCODER 1Nm

Cod. : 620500122

 

Compact high-torque hybrid stepper motor, Incremental encoder on the motor shaft
Space-saving shape of the motoencoder, Independent motor and encoder cables
The sturdy structure, carefully selected individual components and quality raw materials guarantee a long lifetime and maximum precision under all operating conditions.
No maintenance required.

 

MOTOENCODER 2NM COMPATTO CONF.

 
MOTOENCODER 2NM COMPATTO CONF.
 

MOTOENCODER 2NM COMPATTO CONF.

 

AL2410CIMB

 
AL2410CIMB
 

AL2410CIMB

Cod. : AL2410CIMB

 

240W Single Output Industrial DIN RAIL Power Supply

Universal AC input / Full range
Built in active PFC function, PF>0.95
Protections:Short circuit/Over load/Over voltage/Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment)approved
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at 100KHz

 

ALPHA CP Control Panel

 
ALPHA CP Control Panel
 

ALPHA CP Control Panel

Cod. : ALPHA CP

Alpha Cp is the Control Panel for diagnosing and
commanding ALPHA systems.
It is used to display the status of the robot and to manage the following menus in real time:

Select program / Robot controls menu / Inputs-Outputs
Status / Diagnosis / Select language / Adjust display.
The rear-lit LCD has 6 buttons to display and manage the menus (Standard on WRL200-WR300- WR500).

 

ALPHACU4

 
ALPHACU4
 

ALPHACU4

Cod. : ALPHACU4

The CU4 central unit is a control device for systems with three and four interpolated axes.

It manages both linear interpolations and circular 3D interpolations with %u201Cpoint-to-point%u201D and %u201Ccontinuous path%u201D movements; it is programmed via proprietor software with user-friendly graphic interface. There is a support for connectivity type CANOpen%uFFFD (standard CiA%uFFFD DSP402) and serial RS232. All the work programs are saved on the internal flash memory and the standard process Library is included.

 

ALPHAIO16

 
ALPHAIO16
 

ALPHAIO16

Cod. : ALPHAIO16

The digital input/output board ALPHA IO16 is used to expand the input and output contacts.

All the contacts are optoisolated and protected and can be used in PNP or NPN configuration and two outputs have relays.

The board offers:
16 optoisolated %u201CGeneral purpose%u201D inputs for connecting sensors, external push buttons, PLC outputs etc..

11 digital optoisolated control inputs.
16 %u201CGeneral purpose%u201D outputs for connecting tools, indicators etc.(digital optoisolated outputs / relay outputs).

7 status outputs. In addition, there is a serial connector for feasible future utilities.
The board is used to manage the safety barrier

 

DRIVER SD05/SD10

 
DRIVER SD05/SD10
 

DRIVER SD05/SD10

Cod. : DRIVER SD05/SD10

Drivers SD05 and SD10 for bipolar stepper motors.

SD05 manages up to 48Vdc and 5A with pulse chain input (max 100kHz) and direction. SD10 manages up to 160Vdc and 10A with pulse chain input
(max 200kHz) and direction. The operating parameters (microstepping, phase current, encoder etc.) can be set via proprietor software ALPHADriver SW.

 

CD AND HARDWARE KEY

 
 CD AND HARDWARE KEY
 

CD AND HARDWARE KEY

Cod. : GUIALPHA

GUIALPHA is a system that controls the movements of Cartesian axes, which enables the fulfillment of linear and circular interpolation in the work area of the robot. Using programming software, you can easily load sequences of processes on the central unit memory, which is independent and can be subsequently controlled not only from the software and LCD panel, but also via serial commands, inputs and outputs and CANOpen%uFFFD commands.

The PC software interface, which can be connected to the USB port of the central unit, aids users in programming through the following actions:
Configuring the system
Number and dimensions of the axes, configuration of the ramps and maximum speeds, type of sensors installed etc..

Programming the process
The movement steps of the robot (point, line, arch, circumference, area) generate 3D movement sequences, both %u201Cpoint-to-point%u201D and %u201Ccontinuous path%u201D, which can detect inputs or activate outputs during their execution. Via the flow control steps (comment, branch, jump, calibration line, delay, input detection, output setting, sub-program execution), it is possible to implement cycles, sub-routines, portions of program perfectly similar to the programming language; the user is therefore able to fulfil
various applications with maximum control of the system.

Setting the coordinates from files type
DXF(CAD), DXF(CAD), GDO(Gerber), XLS (Excel): this cuts right down on robot programming times, by exploiting the information that users already know from other systems.
Functions such as copy/paste, drag and drop, multiple edit and the possibility to create subprograms, help the user in rapidly controlling the final application and ensure maximum precision and repeatability in production contexts and de-structured environments and are always preserved thanks to specific parameters (anticipate output activation, calibration lines,...)

Diagnosing and testing the program in real time:

Thanks to the 3D view of the paths and the %u201Cstep by step%u201D execution of each single step, it is possible to verify the positions and test the robot program to fine-tune and calibrate the final application..

 

PACK OF SERIAL INTERFACE AND HW KEY

 
PACK OF SERIAL  INTERFACE  AND HW KEY
 

PACK OF SERIAL INTERFACE AND HW KEY

Cod. : GUIALPHASD

The programming software is indispensable to set the operating parameters of the power devices and ALPHASD05 ALPHASD10.
You can set the following functional parameters.

%u2022 Microstepping
%u2022 Motor phase current
%u2022 Full step motor
%u2022 Encoder  CPR
%u2022 Positioning tolerance
%u2022 Dynamic positioning tolerance
%u2022 IDLE power
%u2022 Brake

 

Programming Kit for RBT5

 
Programming Kit  for RBT5
 

Programming Kit for RBT5

Cod. : GUIRBT5 GUIRBT5 is a system that controls the movements of single caresian axis.
Via programming software you can loaded machining sequences on the central unit mermory, that is independent . The CU can be controlled by software and also by other systems via serial commands, inputs and outputs, commands CANopen %uFFFD.
All the work programs are saved on the internal flash memory, the RBT5 CPU can manage up to 255 programs and 100.000 processing points. It 'support connectivity CANopen %uFFFD and CiA %uFFFD DSP402 RS232.
The device firmware can be updated directly by software.

 

Cavi connessione RBT5 - motore 3,00m

 
Cavi connessione RBT5 - motore 3,00m
 

Cavi connessione RBT5 - motore 3,00m

Cod. : KFRBT5-300

 

CABLE CONNECTION RBT5 - Motor lenght 6,00m

 
CABLE CONNECTION RBT5 - Motor lenght 6,00m
 

CABLE CONNECTION RBT5 - Motor lenght 6,00m

Cod. : KFRBT5-600

 

Programmable controller/driver card for bipolar - CANOPEN

 
Programmable controller/driver card for bipolar - CANOPEN
 

Programmable controller/driver card for bipolar - CANOPEN

Cod. : RBT5

 

Programmable controller/driver card for bipolar stepper motors

Motion control in the following modes:
%uFFFD CANopen (CiA DSP-402)
%uFFFD PLC
%uFFFD Windows-compatible graphic interface
Configuration of various axes, motors, sensors Connectivity via CANopen or serial bus (proprietary) of up to 126 devices
Programmable speed profiles (nominal speed, acceleration, deceleration)
Management of speed connections in the case of point sequences
Windows-compatible graphic interface for programming points, motion profiles (speed, acceleration, deceleration), delays, I/O management.

 

LIGHT CURTAINS CLASSE2 DATASENSOR

 
LIGHT CURTAINS CLASSE2 DATASENSOR
 

LIGHT CURTAINS CLASSE2 DATASENSOR

Cod. : RBTOPT900DS The SAFEasyTM light curtains of the SF 2 series, according to the IEC 61496-1 and IEC 61496-2 standards, are very suitable for hand protection of operators exposed
to risks.
Different models are available with ten standard heights ranging from 150 to 1500 mm, 30 mm resolution and an operating distance reaching 15 m.
The emitter and receiver units are optically synchronised and contain all the control circuits, test input and two safety outputs inside the housing.
The connection with the machine stopping circuits are guaranteed by unshielded M12 4-pole connectors for the emitter and M12 5-pole connectors for the receiver.
The SAFE asy%u2122 light curtains of the SF 2 series have also integrated the test function, automatically activated every 0.5 seconds, without stopping the machine%u2019s working cycle.
A wide range of industrial applications, requiring operator safety, can be solved by the SAFE asy%u2122light curtains, thanks to the extremely compact dimensions (31x32 mm), easy installation and excellent performances.

 

 For more information click here

Cloud
  Cod  AIR  %u201CGeneral  %u201Ccontinuous  %u201Cpoint-to-point%u201D  %u201Cstep  %u2022  %uFFFD  'support  (105%uFFFD) Connectors  (31x32  (ALPHA  (CiA  (DIN  (Excel)  (RAL  (Standard  (anticipate  (comment  (max  (microstepping  (nominal  (normally  (point  (proprietary)  (speed  (standard  -  -5%uFFFDC  /  0245)  05  100%  100KHz ALPHA  100kHz)  10A  110009001 Air  160Vdc  1Nm  20-35  200kHz)  20m/s2  24V  2NM  3000 CABLE  3000 Cod  300V  300m Cavi  300m Cod  332-1  3D  3MT  4-pole  45mm  48Vdc  5-pole  508(industrial  5A  600m CABLE  600m Cod  612252000 Technical  612253000 Technical  612254000 Technical  612256000 Technical  612285000 Technicals  61496-1  61496-2  620500122 Compact  6MT  70%uFFFDC  7001) ALPHASD05  7001) CABLE  7001) MOTOENCODER  90%  90mm  AC  AL2410CIMB 240W  ALPHA  ALPHA CABLE  ALPHA Cod  ALPHACU4 The  ALPHADriver  ALPHAIO16 The  ALPHASD05  ALPHASD10  Acceleration  Adjust  Air  BRAKE AIR  BRAKE Cod  Bending  Brake Programming  Built  CABLES  CANOPEN Programmable  CANOPEN Cod  CANOpen%uFFFD  CANopen  CD  CEI  CLASSE2  COMPATTO  CONF MOTOENCODER  CONF AL2410CIMB AL2410CIMB Cod  CONNECTION  CP  CP Alpha  CPR%u2022  CPU  CU  CU4  CU4/ALPHA  CURTAINS  Cartesian  Category  Chain%uFFFD  CiA  CiA%uFFFD  Color  Conductor  Configuration  Configuring  Connectivity  Control  Cooling  Cp  DATASENSOR LIGHT  DATASENSOR Cod  DIN  DRIVER  DRIVER/CALOTTA  DSP-402)  DSP402  DSP402)  DXF(CAD)  Details  Details Permissible  Diagnosis  Dynamic  Energy  FT1  Fine-wire  Fixed  Flame  Full  Functions  GDO(Gerber)  GUIALPHA GUIALPHA  GUIALPHASD The  GUIRBT5  HARDWARE  HW  I/O  IDLE  IEC  INTERFACE  IO16  IO16 CABLE  IO16 Cod  Incremental  Independent  Industrial  Inputs-Outputs  KEY CD  KEY PACK  KEY Cod  KFRBT5-300 CABLE  KFRBT5-600 Programmable  Kit  LCD  LED  Library  M12  MM  MOT  MOTORS ALPHASD05  MOTORS Cod  Management  Max  Mechanically  Microstepping  Motor  NPN  Norme  Number  Outer  Output  PC  PF>095  PFC  PLC  PNEUMATIC  PNP  PVC  PVC Heat  Panel  Panel ALPHA  Panel Cod  Permissible  Positioning  Power  Programmable  Programming  ProtectionsShort  RAIL  RBT5  RBT5 Programming  RBT5 Programmable  RBT5 Cod  RBTOPT900DS  RS232  Radius  Rated  Robot  SAFE  SAFEasyTM  SD05  SD05 CABLE  SD05 Cod  SD05/SD10 DRIVER  SD05/SD10 Cod  SD05/SD10 Drivers  SD10  SERIAL  SF  SW  Select  Series)  Shield  Single  Space-saving  Status  Supply Universal  T2  TS-35/75  Technical  Temperature  Tinned  UL  USB  VDE  WEIDMULLER  WR500) ALPHACU4 ALPHACU4 Cod  WRL200-WR300-  Windows-compatible  XLS  absence  acceleration  accordance  actions  activate  activated  activation  active  adapted  addition  aids  air  application  application PACK  applications  applied  approx  arch  area  area)  asy%u2122  asy%u2122light  automatically  avoid  axes  axes It  axis  axis CABLE  axis -  bare  barrier DRIVER  bending  bipolar  blend  blocks  board  braid  braided  brake  branch  burn-in  bus  buttons  cables  calibrate  calibration  card  carefully  caresian  case  central  chain  circuit/Over  circuits  circular  circumference  clickhere  closed)  code  colors  commanding  commands  compact  components  conditions  conductor  conductors  configuration  connectable  connected  connecting  connection  connection CABLE  connections  connectivity  connector  connectors  connessione  contacts  contacts All  contexts  control  controlled  controller/driver  controlling  controls  convection  coordinates  copper  copy/paste  core  coverage  create  current  current%u2022Full  curtains  cuts  cycle  cycles  de-structured  deceleration)  delay  delays  details Conductor  detect  detection  device  devices  diagnosing  digital  dimensions  direction  directly  display  distance  drag  driver  drop  easily  easy  edit  emergency  emitter  enables  encoder  ensure  environments  equipment)approved  etc 11  etc(digital  etc)  excellent  execution  execution)  expand  exploiting  exposed  external  extremely  falls  feasible  files  final  fine-tune  firmware  flash  flow  free  frequency  fulfil  fulfillment  full  function  functional  future  generate  graphic  grey  guarantee  guaranteed  hand  heights  high-torque  housing  hybrid  implement  included ALPHAIO16 ALPHAIO16 Cod  independent  indicator  indicators  indispensable  individual  industrial  information  input  input/output  inputs  inside  installation  installed  insulation  integrated  interface  internal  interpolated  interpolation  interpolations  jacketPVC-based  jump  language  laying  lenght  lifetime  light  line  linear  lines) Diagnosing  load  load/Over  loaded  long  low-adhesion  machine  machine%u2019s  machining  made  maintenance  manage  management LIGHT  manages  materials  maximum  memory  menu  menus  mermory  mm  mm)  model  models  modes  motion  motoencoder  motor  motor%u2022Encoder  motore  motors  motors Motion  motors SD05  movement  movements  moves  moving/fixed  multiple  offers  oil-resistant  operating  operator  operators  optical  optically  optoisolated  output  outputs  outputs) 7  pairs  panel  parameters  parameters %u2022  path%u201D  paths  perfectly  performances For  phase  pitch  pneumatic  point  points  polymer  port  portions  positioning  positions  possibility  power  power%u2022  precision  preserved  process  processes  processing  production  profiles  program  programmed  programming  programs  proprietor  protected  protection  pulse  purpose%u201D  push  quality  radius  rail  ramps  range  ranging  rapidly  raw  reaching  real  rear-lit  receiver  relay  relays The  releases  removes  repeatability  required MOTOENCODER  requirements  requiring  resistant  resolution  retardant  risks  robot  safety  saved  seconds  selected  sensors  sequences  serial  series  set  setting  shaft  shape  short  similar  single  software  software Cavi  solenoid  solved  special  specific  specifications Permissible  speed  speeds  spring  standard  standards  status  step  step%u201D  stepper  steps  stopping  structure  sturdy  sub-program  sub-routines  subprograms  subsequently  suitable  support  switching  synchronised  system  system Setting  systems  temperature  ten  test  testing  time Select  time Thanks  times  tolerance%u2022  tools  torque  tough  twisted  twisting  type  unit  units  unshielded  updated  user  user-friendly  users  utilities  valve  verify  vertical  view  voltage  voltage/Over  wide  wires  work  working  2  6  15  16  30  126  150  255  1500  6600  47100  100000  612286000