The best solutions for your company
Products
You are here: Products -> DISPENSING -> FISNAR -> Fluidsure Pail & Can Pump Equipment

Fluidsure Pail & Can Pump Equipment

Fluidsure Pail & Can Pump Equipment


DA35 - 1 gallon & 1 quart autocan extruder

DA35 Auto can Extruder

DA35 shown with a VC1195N dispenser and 790HP valve.

 

The DA35 extrudes medium to high viscosity material, such as paste, silicone and grease under pressure directly from a pre-filled can. Suitable for automatic and semi-automatic controlled dispensing applications, which require a constant supply of air-free material. By using the DA35, air bubbles and material voids that are caused by handling or decanting viscose material are prevented.

The can is prepared by cutting off its top, the extruder pump body is lifted and the can placed in position. The extruder pump body is fitted with a follower-plate that seals and follows the material as the level drops to wipe the sides of the can clean limiting waste. The fluid is pressure fed by reinforced hoses to a valve, which is either mounted to a robot or operator held with a gun handle. The valve is actuated by a valve controller.

 

Features
  • Material delivered air-free
  • Wipe-clean action
  • Air rams to assist pumping of materials
  • Follower-plate change for 1kg (1qt) and 3kg (1gallon) cans
  • Adjustable air ram pressure
  • Low noise electric extruder motor
  • Simple load mechanism also provides easy cleaning
  • Teflon, Viton and PEEK seals for wetted parts
  • Avoids waste
  • No need to transfer material
  • Easy hook up for automatic systems

EP1300N - 1 gallon & 1 quart air ram pump system

EP1300N Pump

EP1300N

 

The EP1300N series include machine variations to suit a range of can & pail sizes together with differing material characteristics, such as paste, silicone or grease. Systems are designed for quiet operation when handling medium to high viscosity fluids.

A low-pulse pump design that when used in conjunction with a fluid regulator, makes the system suitable for automatic production dispensing applications. These applications require a constant supply of air-free material.  Air bubbles and material voids, caused by handling or decanting high viscosity fluids, are prevented.

The extruder pump body is fitted with a follower-plate that seals and follows the material as the level drops to wipe the sides of the can clean limiting waste. The fluid is pressure fed by reinforced hoses to a valve, which is either mounted to a robot or operator held with a gun handle. The valve is actuated by a valve controller.

The EP1301N is designed for a 1kg (1qt) can of medium to high viscosity fluid. The EP1303N is configured for a 3kg (1 gallon) can of similar viscosity. Both systems are rated at 15:1 and provide a maximum of 996psi regulated material pressure.

Features
  • Material delivered air-free
  • Wipe-clean action
  • Air rams to assist pumping of materials
  • Follower-plate change for 1kg (1qt) and 3kg (1gallon)
  • Adjustable air ram pressure
  • Electrical extruder motor
  • Simple load mechanism also provides easy cleaning
  • Teflon wetted parts
  • Avoids waste
  • No need to transfer material
  • Easy hook up for automatic systems

EP1305N - 5 gallon pail extruder pump system

EP1305N 5 Gallon Pump

A low-pulse pump design that when used in conjunction with a fluid regulator, makes the system suitable for automatic production dispensing applications. These applications require a constant supply of air-free material.  Air bubbles and material voids, caused by handling or decanting high viscosity fluids, are prevented.

The extruder pump body is fitted with a follower-plate that seals and follows the material as the level drops to wipe the sides of the pail clean limiting waste. The fluid is pressure fed by reinforced hoses to a valve, which is either mounted to a robot or operator held with a gun handle. The valve is actuated by a valve controller.

The EP1305N is designed for a 5 gallon pail of medium to high viscosity fluid. Ideal for silicones and grease. Systems are rated at 15:1 and provide a maximum of 996 psi regulated material pressure.

 

Features
  • Material delivered air-free
  • Wipe-clean action
  • Air rams to assist pumping of materials
  • Follower-plate 20kg (5 gallons)
  • Adjustable air-ram pressure
  • Electrical extruder motor
  • Simple load mechanism also provides easy cleaning
  • Teflon wetted parts
  • Avoids waste
  • No need to transfer material
  • Easy hook up for automatic systems

EP1306N - 5 gallon high pressure pump system

EP1306N 5 Gallon High Pressure Pump

EP1306N 5 Gallon High Pressure Pump

 

A high-ratio, high-pressure 5 gallon system, suitable for most pastes, silicones and grease type fluids.  The system integrates a low-pulse pump design that when used in conjunction with a fluid regulator allows the system to be used in robotic controlled dispensing applications.

The extruder pump body is fitted with a follower-plate that seals and follows the material as the level drops to wipe the sides of the pail clean limiting waste. The fluid is pressure-fed by reinforced hoses to a valve, which is either mounted to a robot or operator held with a gun handle. The valve is actuated by a valve controller.

The EP1306N is designed for a 5 gallon pail of high viscosity fluid.

Features
  • Material delivered air-free
  • Wipe-clean action
  • Air rams to assist pumping of materials
  • Follower-plate 20kg (5 gallons)
  • Adjustable air-ram pressure
  • Electrical extruder motor
  • Simple load mechanism also provides easy cleaning
  • Teflon wetted parts
  • Avoids waste
  • No need to transfer material
  • Easy hook up for automatic systems

EP1310C - 1/10 gallon single cartridge pump system

EP1310C Single Cartridge Pump

EP1310C Single Cartridge Pump

 

A powerful medium ratio system for controlled fluid transfer from 1/10 gallon (310ml) plastic cartridges. Suitable for silicone type fluids. The system integrates a low-pulse pump design that can be used with a manual hand valve or connected to an automatic production robot for controlled dispensing applications.

The EP1310C is designed to easily transfer material for controlled dispensing via a high pressure valve. The suitable viscosity range is 5,000cps - 600,000cps. Rated at 15:1 the system provides a maximum of 996 psi regulated material pressure. The cartridge is contained with a metal jacketed cylinder.

 

Features
  • Material delivered air-free
  • Wipe-clean action
  • High-pressure regulation
  • Pressure piston assist
  • Adjustable piston pressure
  • Electrical extruder motor
  • Simple load mechanism also provides easy cleaning
  • Teflon wetted parts
  • Avoids waste
  • No need to transfer material
  • Easy hook up for automatic systems

EP1320C - 1/10 gallon dual cartridge pump system

EP1320C Dual Cartridge Pump

EP1320C Dual Cartridge Pump

 

A powerful medium-ratio system for controlled fluid transfer from 1/10 gallon (310ml) plastic cartridges. Suitable for silicone type fluids. The system integrates a dual (A B) tandem cartridge arrangement for continuous-flow management. A low-pulse pump design allows automatic control of dispensing applications.

The EP1320C tandem cartridge pump is designed to easily transfer material for controlled dispensing via a high pressure valve. The suitable viscosity range is 10,000cps - 600,000cps. Rated at 15:1 the system provides a maximum of 995 psi regulated material pressure. The A & B cartridge management automatically switches from either A to B or B to A when the cartridge is exhausted. Cartridges are contained in metal jacketed cylinders.

Features
  • Material delivered air-free
  • Wipe-clean action
  • High-pressure regulation
  • Pressure piston assist
  • Adjustable piston pressure
  • Electrical extruder motor
  • Simple load mechanism also provides easy cleaning
  • Teflon wetted parts
  • Avoids waste
  • No need to transfer material
  • Easy hook up for automatic systems

High Pressure Fluid Hoses & Fittings

High Pressure Braided Hosing

Features
  • PTFE Teflon® (Dupont T-62) Moisture Lock
  • Non-absorbent - will not impart taste or odor
  • Non-contaminating - easy to clean
  • High/Low pressure rated - no deterioration over time
  • Smooth liner - no entrapment issues
  • Prevents build-up of deposits
  • Chemically resistant - handles a variety of fluids
  • Low friction
Approvals
  • USP Class VI
  • FDA 21CFR177.1550
  • USDA
  • 3A SANITARY STANDARDS

 

For more information please click here :

Fluidsure Pail & Can Pump Equipment

 
Cloud
Fluidsure  &  (1  (1gallon)  (1gallon) Adjustable  (1qt)  (310ml)  (5  (A  (Dupont  -  1/10  10000cps  1kg  20kg  21CFR1771550 USDA 3A  3kg  5000cps  600000cps  790HP  996psi  Air  B)  Cartridge  Cartridges  Class  DA35  Dual  EP1300N  EP1301N  EP1303N  EP1305N  EP1306N  EP1310C  EP1320C  Equipment  Fittings Features PTFE  Fluid  Hoses  Ideal  Lock Non-absorbent  Moisture  PEEK  Pail  Pressure  Pump  Pump A  Rated  SANITARY  STANDARDS For  Single  Suitable  Systems  T-62)  Teflon®  VC1195N  VI FDA  Viton  action Air  action High-pressure  actuated  air  air-free  air-free Wipe-clean  air-ram  applications  applications The  arrangement  assist  assist Adjustable  autocan  automatic  automatically  body  bubbles  build-up  cans Adjustable  cartridge  cartridges  caused  change  characteristics  clean  clean High/Low  cleaning Teflon  click  configured  conjunction  connected  constant  contained  continuous-flow  control  controlled  controller Features Material  controller The  cutting  cylinder Features Material  cylinders Features Material  decanting  delivered  deposits Chemically  design  designed  deterioration  differing  directly  dispenser  dispensing  drops  dual  easily  easy  electric  entrapment  exhausted  extruder  extruder DA35  extrudes  fed  fitted  fluid  fluid Features Material  fluids  fluids A  fluids Low  follower-plate  friction Approvals USP  gallon  gallon)  gallons) Adjustable  grease  gun  hand  handle  handles  handling  held  high  high-pressure  high-ratio  hook  hoses  impart  include  information  integrates  issues Prevents  jacketed  level  lifted  limiting  liner  load  low-pulse  machine  makes  management  manual  material  material Easy  materials Follower-plate  maximum  mechanism  medium  medium-ratio  metal  motor Simple  mounted  noise  odor Non-contaminating  operation  operator  pail  parts Avoids  paste  pastes  piston  plastic  position  powerful  pre-filled  prepared  pressure  pressure Features Material  pressure Electrical  pressure Features Material  pressure Low  pressure-fed  prevented The  production  provide  psi  pump  pumping  quart  quiet  ram  rams  range  rated  ratio  regulated  regulation Pressure  regulator  reinforced  require  resistant  robot  robotic  seals  semi-automatic  series  shown  sides  silicone  silicones  similar  single  sizes  suit  suitable  supply  switches  system  system A  system A  system EP1300N The  system EP1310C  system EP1320C  systems  systems EP1300N  systems EP1305N  systems EP1306N  systems EP1310C  systems EP1320C  systems High  tandem  taste  time Smooth  top  transfer  type  valve  valve The  variations  variety  viscose  viscosity  voids  waste  waste No  wetted  wipe  1  5  151  995  996